ACC X.25 Data Analyzer User's Guide

Data Analyzer Commands
run
Chapter 336
-p Specify level 2 or level 3 protocol for analysis and trace
display. See the protocol command for specific details
on format for option -p.
Examples
To start the analyzer on ZLUs 19 and 20 use the command:
run 19
The command run 20 would have the same effect. In this example the
default file name would be /var/opt/acc/log/anz_19.eve. If run 20
had been used the file name would have been
/var/opt/acc/log/anz_20.eve, but the data captured would have been
the same.
Display> run 19
Analyzer on ZLUs 19 and 20 started OK
To start the analyzer with LCN filtering for LCN numbers 120, 139, and
200 use the following command:
Display> run 19 -l 120 139 200
Analyzer on ZLUs 19 and 20 started OK