ACC X.25 Protocol User's Guide

X.25 Application Programming
ZX25RESET_CONF (3X) — ACC X.25
Chapter 4124
PAR A ME TER S : zxip ZCOM X.25 access data structure (from zx25info call).
vzap ZCOM address of the Virtual Circuit terminal.
RETURN VALUE Routine zx25reset_conf returns a 0 when successful. If there was a ZCOM
error, it returns a negative value. See
/opt/acc/include/zcom/zcomsys.h for the list of ZCOM error codes and
their meanings. If zx25reset_conf itself failed, one of the following
positive error codes is returned:
ZxeUNKNOWN_L2_ZLU (02) Unable to find the X.25 link ZLU for
this SVC ZLU.
ZxeREQ_TIMEOUT (04) The remote ZCOM system did not
respond within 30 seconds.
ZxeINVALID_STATE (06) The ZLU specified does not have an
inbound Reset awaiting confirmation.
ZxeLINK_IS_DOWN (11) The X.25 link is down. Unable to send
Reset Confirmation.
ZxeUNKNOWN_VC_ZLU (13) The ZLU specified is not an X.25
Virtual Circuit ZLU.
ZxeMUST_CALL_ZX25INFO (17) The zx25info() routine has not been
called. You must call zx25info before
issuing any other zx25...() calls.
ZxeBAD_ZX25INFO_ADDR (18) The pointer to the zx25info_type
structure does not contain the same
address that was passed to the
zx25info() routine.
ZxeX25_NOT_INITIALIZED (98) The ACC X.25 subsystem has not
been initialized. You must run
zx25d_init before issuing any zx25...()
calls.