ACC X.25 Protocol User's Guide

Installation
Software Loading Procedure
Chapter 218
Software Loading Procedure
The ACC X.25 related software is included with the ACC Protocols for
Application Developers product. The software is installed from the
HP-UX Application CD-ROM, in superuser mode, using the swinstall
utility. The steps are shown below.
Step 1. Log in to the system as “root”.
Step 2. Place the media in a local or remote CD-ROM drive.
Step 3. Run swinstall, which behaves the same in the GUI interface as for the
terminal interface. When the “Specify Source” box opens, select “Source
Depot Type” to “Local CDROM”, or for a remote CD-ROM driver, select
for “Network Directory/CDROM” and set “Source Host Name …”. Select
“OK”.
Step 4. Select the ACC Protocols for Application Developers product and any
other ACC items to be installed, from the list of software bundles; open
the “Actions” menu and select “Mark for Install”.
Step 5. When all items have been marked, select “Install (analysis)”; select “OK”
and proceed.
CAUTION A final Confirmation message informs you that a new kernel will be
rebuilt using the filesets installed, and the system will reboot. When you
are ready, select “Yes”.
The “Install (analysis)” window allows you to track summary progress of
the installation process. Use the “Logfile” feature to display a detailed
status, which is logged to /var/adm/sw/swagent.log.