ACC X.25 Protocol User's Guide

Installation
Installation Verification
Chapter 224
Step 8. The sent data can now be received and displayed:
ZTERM> rx,list
10:34:34 Msg from tmnl ZLU#00200(00123) len 50 No error detected
Lcn .00. .01. .02. .03. .04. .05. .06. .07. .08. .09. ASCII.....ASCII.....
000 5A74 3031 3431 3300 206D 6573 7361 6765 206E 6F2E Zt01413 message no.
010 2030 3030 3031 206C 656E 6774 6820 2020 2035 3024 00001 length 50$
020 6F70 7172 7374 7576 7758 opqrstuvwX
10:34:34 Msg from tmnl ZLU#00200(00123) len 50 No error detected
Lcn .00. .01. .02. .03. .04. .05. .06. .07. .08. .09. ASCII.....ASCII.....
000 5A74 3031 3431 3300 206D 6573 7361 6765 206E 6F2E Zt01413 message no.
010 2030 3030 3032 206C 656E 6774 6820 2020 2035 3024 00002 length 50$
020 6F70 7172 7374 7576 7758 opqrstuvwX
<CNTRL-C>
10:34:42 Error on ZREAD: Interrupt occurs while waiting
10:34:42 Messages received 2, Messages looped back 0
10:34:42 Elapsed time is 7732 ms
ZTERM> ex
%
The ASCII portion of the displayed message can be used to observe the
message number. The rx command must be terminated using a <cntrl-C>
command.