ACC X.25 Protocol User's Guide

ZX25D X.25 Protocol Driver
Configuration
Chapter 332
Term 0100 01:4 X25.LAPB X25_LINK_DTE_400 ~
10 0 0 0 0 CALL:226633004 ”X25 DTE POS 226633004”
* no_autostart
option 02h
last_pvc 3
first_insvc 4
last_insvc 6
first_svc 9
last_svc 12
first_outsvc 14
last_outsvc 15
def_inpacket 7
def_outpacket 7
def_inwindow 2
def_outwindow 2
T1_timer res_100ms 4
T2_timer res_10ms 20
T3_T4_timer res_10s 4
Note that the “no_autostart” parameter is commented out which means
that when the zx25d_init program is used to initialize the X.25
subsystem, the X.25 link will automatically be enabled. The application
program would otherwise be responsible for establishing the X.25 link
(by enabling the link ZLU).
This terminal definition defines an X.25 link terminal with ZLU 100 on
ACC interface 1 port 4. It is configured as an X.25 DTE with T1 value of
400 milliseconds. The local subscription address is 226633004. In this
example, the Logical Channel Number ranges are:
Logical Channels 7, 8, 13, and 16 to 4095 are unassigned. Note that
these ranges are from the DTE’s point-of-view. For more information,
refer to the X.25 standard.
PVCs - 1 to 3
One-Way Incoming - 4 to 6
Two-Way - 9 to 12
One-Way Outgoing - 14 to 15