ACC X.25 Protocol User's Guide

ZX25D X.25 Protocol Driver
Configuration
Chapter 336
last_outsvc Highest Outgoing SVC Logical Channel Number -
Default is 0.
If these have a value other than zero, all the Logical
Channels from first_outsvc to last_outsvc can be used
for CALLs to be made from the DTE to the DCE only.
def_inpacket Default Inbound SVC Packet Size. Default is 0.
def_outpacket Default Outbound SVC Packet Size. Default is 0.
The parameter supplied here is used to configure the
SVC packet size unless overridden at call setup by
facility negotiation. The packet sizes (bytes) which
correspond to these parameters are as follows:
def_inwindow Default Inbound SVC Window Size. Default is 7.
def_outwindow Default Outbound SVC Window Size. Default is 7. The
parameter supplied here is used to configure the SVC
window size unless overridden at call setup by facility
negotiation. The window size must be in the range one
(1) to seven (7).
0 - 128 8 - 256
1 - Reserved 9 - 512
2 - Reserved 10 - 1024
3 - Reserved 11 - 2048
4 - 16 12 - 4096
5 - 32 13 - Reserved
6 - 64 14 - Reserved
7 - 128 15 - 240