ACC X.25 Protocol User's Guide

X.25 Application Programming
ZX25CALLACC (3X) — ACC X.25
Chapter 488
ZxeUNKNOWN_VC_ZLU (13) The ZLU specified is not an X.25
Virtual Circuit ZLU.
ZxeINVALID_CUD_LEN (14) The length specified for the Call User
data is longer than the maximum
permissible value (usually 128 bytes).
ZxeINVALID_FAC_LEN (15) The length specified for the Facilities
data is longer than the maximum
permissible value (usually 109 bytes).
ZxeRESTRICT_FAS_SEL (16) Restricted fast-select facility was
specified in the inbound call.
You may only send a clear request.
That is, it is illegal to accept the
inbound call.
ZxeMUST_CALL_ZX25INFO (17) The zx25info() routine has not been
called. You must call zx25info before
issuing any other zx25...() calls.
ZxeBAD_ZX25INFO_ADDR (18) The pointer to the zx25info_type
structure does not contain the same
address that was passed to the
zx25info() routine.
ZxeX25_NOT_INITIALIZED (98) The ACC X.25 subsystem has not
been initialized. You must run
zx25d_init before issuing any zx25...()
calls.
ZxeX25_TBL_FULL (99) The X.25 routines maintain an
internal table for accessing remote
ZCOM nodes. This table has room to
access up to 20 different ZCOM nodes
(including the local node). This
request attempted to access the 21st
ZCOM remote node and the internal
table used had insufficient space to
save the routing data.