Ethernet SNMP Module Installation and Reference Guide ( J2603B) 1995-10

6. When the self-tests of the hub, the HP Ethernet SNMP Module, and

any auxiliary module complete successfully, the Exp Slot LED on the

front of the hub will be ON continuously. The hub and accessories

are now operational. (Note that on some HP AdvanceStack

10Base-T hubs, this LED is labeled AdvSlot.)

See your hub manual for other procedures to complete the hub installation.

Firmware Enhancements

In the future, Hewlett-Packard may provide improvements to this product

through firmware upgrades. The upgrade code can be downloaded from

a PC attached to the hub’s RS-232 port or over the network. The update

procedures are described in documents that come with the firmware

enhancements.

You can determine the current firmware version on the SNMP Module from

either HP Stack Manager, HP Interconnect Manager/Windows, or the

console. In HP Stack Manager and HP Interconnect Manager, use the

Identify function to obtain that information. Look for the SNMP Agent

EEPROM version number in the Identify window. When you access the

console, the version number appears.

You can get the latest agent firmware by using any of the following ways:

Use the download instructions provided in chapter 3,

“Troubleshooting”.

Use the download instructions on the perforated quick reference

card in this manual.

Contact your HP-authorized LAN dealer or local HP sales office for

the latest on firmware enhancements for your HP Ethernet SNMP

Module.

Installation

1-5