Ethernet SNMP Module Installation and Reference Guide ( J2603B) 1995-10

G
Giant packets, counter ... 2-13
H
Help command ... 2-10
Hourly support
calling for ... 3-6
HP Dial-A-LAN module
connecting with the AUxiliary command ... 2-11
HP FIRST FAX Retrieval Service
using ... 3-6
HP FTP Library Service
using ... 3-5
HP Interconnect Manager
features with SNMP Module ... 2-5
HP Router 210 module
connecting with AUIxiliary command ... 2-11
HP Stack Manager
features of ... 2-2
Hub
installing the SNMP Module into ... 1-2
Hubselect command ... 2-14
I
ICMP Echo Request packets (Ping test) ... 2-20
installing the SNMP Module ... 1-2
Internet
obtaining latest drivers from ... 3-5
obtaining software from ... 3-4
Intruder prevention ... C-2
auto port disable ... C-5
send alarm ... C-5
setting inbound security ... C-4
IP address ... 2-17
IP addressing ... 2-6
IP Configuration
from HP Stack Manager ... 2-3
IPconfig command ... 2-15
IPX addressing ... 2-6
L
LEDs
during self test ... 1-4
M
MAC address
See station address
Managers command ... 2-18
Modem Configuration
from HP Stack Manager ... 2-4
Modems
configuration ... B-2
N
Network Addressing
from HP Interconnect Manager ... 2-6
Network management
security violations ... 2-26
Network Test
from HP Stack Manager ... 2-4
O
Outbound security ... C-6
P
Password command ... 2-19
Physical address
See station address
Ping command ... 2-20
Port command ... 2-20
Port Security
from HP Interconnect Manager ... 2-5
Port status
display ... 2-27
Primary default router ... 2-17
R
Redundant SNMP management
from HP Interconnect Manager ... 2-5
Remote station address ... 2-11
Removing an SNMP Module ... 1-6
Reset command ... 2-21
Resetting the hub
reset command ... 2-21
Robust Port Control
from HP Stack Manager ... 2-3
Robustness command ... 2-21
Index
Index-3