Ethernet SNMP Module Installation and Reference Guide ( J2603B) 1995-10

S
Secure command ... 2-21
Security
authorized station address ... C-3
auto port disable ... 2-22, C-5
clearing the violation indicators ... 2-25
configuring a single port ... 2-23
configuring all twisted-pair ports ... 2-24
detailed description ... C-2
eavesdrop prevention ... 2-23, C-2, C-6
from HP Stack Manager ... 2-3
intruder prevention ... C-2
network management security violations ... 2-26
send alarm ... 2-23, C-5
showing the current configuration ... 2-25
Security command ... 2-21
Security violation indicators
clearing ... 2-25
network management security violations ... 2-26
port security violations ... 2-26
Self test
LED pattern during ... 1-4
Send alarm ... C-5
Send alarm, security parameter
configuration ... 2-23
SNMP Module
installing ... 1-2
removing from a hub ... 1-6
Speed command ... 2-27
Stack Manager
See HP Stack Manager
Starting a console session ... 2-7
static electricity
handling procedures ... 1-2
Station address
use in IPX address ... 2-16
Status command ... 2-27
Subnet mask ... 2-17
Syntax conventions for console commands ... 2-10
T
technical support
types of ... 3-4
Telnet session
establishing ... 2-8
Terminating a console session ... 2-13 – 2-14
Test packets ... 2-11
Testlink command ... 2-28
Thinwatch command ... 2-28
Time to live ... 2-17
Total packets ... 2-13
W
World Wide Web
obtaining software from ... 3-4
WWW
obtaining software from ... 3-4
Index
4-Index