Installation and Reference Guide (J3210A, J3212A, J3200A, J3202A, J3204A) 1996-08

4-4
Removing A Hub From a Stack
Reinserting a Hub into a Stack
Removing A Hub From a
Stack
Top or Bottom Hub: If you disconnect a hub at the top or bottom of the stack,
then the hubs in the middle will still communicate.
If the removed hub has a Management Module, move the Management Module
into another hub in the stack following the removal and installation instruc-
tions in chapter 1.
Top hub removed
Bottom hub removed
Top hub can’t communicate with
rest of stack. Remove an Extender
All hubs in the middle can communicate
with each other.
A middle hub removed.
Management Modules
Stack Example 1 Stack Example 2
Cable and connect hubs together.