Installation Guide (J3192C, and J3193B) 1998-07

9
Software (OS) Update for the Switch 2000.
The Software (OS) Update Disks shipped with your transceiver include
operating system (OS) updates for the “A” and “B” versions of the Switch
2000—HP J3100A and HP J3100B—plus an Update utility and other infor-
mation.
Do You Need To Update the Switch 2000 OS?
If you are installing a 100Base-T transceiver in the Switch 2000, do the
following to determine which OS version the switch is using:
1. In the Switch 2000 console, use the Version command to determine
which version of the switch’s operating system (OS) software is in use.
a. At the Main Menu, select Command Prompt—or Advanced
Commands—then type version and press [Enter].
The resulting display will include the OS version in use, and will
appear similar to the following:
B.04.24
b. Use the exit command to return to the Main Menu.
2. Determine whether to update the switch’s operating system (OS)
software to the OS version on the 3-1/2 inch Update Disk included with
the transceiver:
To Update the Switch 2000 OS:
Use the software that is provided on the disk shipped with your HP J3192C
or HP J3193B transceiver.
The disk contains one or more of the following files:
Minimum OS Version Required*
Transceiver Model Switch 2000A Switch 2000B
HP J3192A (UTP) Transceiver A.02.50 Not Supported
HP J3192B (UTP) Transceiver A.03.01 B.03.01
HP J3192C (UTP) Transceiver A.03.20 B.03.20
HP J3193B (Fiber) Transceiver A.03.01 B.03.01
*To identify the OS version on your switch: Run the switch console
interface, select “Statistics” or “Status and Counters” from the Main
menu, and then select “Switch Information” from the Statistics or
Status and Counters menu.
L&h_c_2.fm5 Page 9 Wednesday, July 15, 1998 12:22 PM