Installation and Reference Guide HP AdvanceStack 100Base-THub-12TX, Hub-12TXM, and Switch Modules 1997-06

Index 1
Index
A
Accessing the VT-100 Console Interface • 4-5
Applications
Connecting Remote Stacks • 3-11
Connecting to the Extended Network • 3-12
Extending the Network with Alternate Connections • 3-8
Interconnecting Isolated Collision Domains • 3-10
Isolating Multiple Hubs • 3-7
Isolating Specific Hub Connections • 3-6
Linking the Stack to a Management Station • 3-9
B
Backup Links • 3-4
Backup Port Parameters • 4-26
Bridging Functions • 2-10
Bytes • 4-29
C
Cascade Port • 5-11
Changing User Passwords • 4-37
Collision • 5-6
Collision Domain Timing Constraints • 2-8
Communication Mode
Selection • 2-10
Setting • 2-10
Configuration Parameters
Authorized Port Address • 4-26
Bootup Option • 4-21
Community Name • 4-16
Download Filename • 4-35
Download Mode • 4-35
Download Server IP • 4-35
Gateway IP • 4-14
Half/Full Duplex • 4-24
Hub ID • 4-20
Hub Position • 4-20
IPX Frame Type • 4-14
Link State • 4-23, 4-24
Partition • 4-23
Serial IP • 4-14
Subnet Mask • 4-14
Transmission Speed • 4-24
Upload Mode • 4-37
User Type • 4-38
Configuration Program
For Hub-12TXM and Stack • 4-10
Stack • 4-10
Configuring the System • 4-1
Configuring Your System • 4-5
Connecting Fiber Optic Cabling • 2-8
Connecting Hubs to the Stack • 3-5
Connecting the Hub System • 2-4
Connecting the Stacking Cable • 2-5
Connecting to a Switch Port Module • 2-6
Connecting to MDI Cascade Port • 2-6
Connecting to MDI-X Hub Port • 2-4
Connecting Twisted-pair Cabling • 2-7
Connectivity Test • 4-39
Console Port • 5-5, 5-10
Console Security • 4-37
Console Timeout • 4-37
Cut-through Switching • 1-9
D
Diagnostic Tests • 2-12
Disable • 5-8
Distance Limit and Power Loss in Fiber Optics • 2-9
Downloading System Software
TFTP Server • 4-34
Xmodem Protocol • 4-36