Release Notes K.12.12

Enhancements

Release K.11.12 Enhancements

Enhancements

Unless otherwise noted, each new release includes the enhancements added in all previous releases.

Enhancments are listed in chronological order, oldest to newest software release. To review a

summary of enhancements included since the last general release that was published, begin with

“Release K.12.06 Enhancements” on page 29.

Descriptions and detailed instructions for enhancements included in Release K.12.xx or earlier are

included in the latest release of manuals for the ProCurve 3500yl, 6200yl, and 5400zl Series switches

(February 2007), available on the web at www.hp.com/rnd/support/manuals

Release K.11.11 was the first production software release for the ProCurve 3500yl, 6200yl, and 5400zl

Series switches. Release K.11.69 is the last release of the K.11.xx software. The 3500yl, 6200yl, and

5400zl switch software code was rolled to the K.12.0x code branch with no intervening releases.

Release K.11.12 Enhancements

Release K.11.12 includes the following enhancement:

■ MSTP Enhancement Implementation of legacy path cost MIB and CLI option for MSTP.

Release K.11.13 through K.11.32 Enhancements

No enhancements, software fixes only.

Release K.11.33 Enhancements

■ With the K.11.33 software release, support for the following ProCurve products was added:

• J8698A / J8700A(bundle) for the ProCurve switch 5412zl

• J8706A - ProCurve Switch 5400zl 24p Mini-GBIC Module

• J8708A - ProCurve Switch 5400zl 4p 10-GbE CX4 Module

• J8992A - ProCurve Switch 6200yl-24G-mGBIC

Release K.11.34 Enhancements

Release K.11.34 includes the following enhancements:

■ Increased number of telnet/SSH sessions: The maximum number of simultaneous telnet/

SSH sessions has been increased from three to five. The CLI commands show telnet and show

ip ssh now report on five sessions rather than just three.

■ CLI-configured sFlow with multiple instances: In earlier software releases, the only

method for configuring sFlow on the switch was via SNMP using only a single sFlow instance.

Beginning with software release K.11.34, sFlow can also be configured via the CLI for up to