Switch 7700 Command reference Guide, v2.0

112 CHAPTER 5: USING ROUTING PROTOCOL COMMANDS
View
All views
Parameter
None
Description
Using the display ip routing-table radix command, you can view the route
information in a tree structure.
Example
To display the route infromation, enter the following:
<SW7700>display ip routing-table radix
The information displays in the following format:
Radix tree for INET (2) inodes 7 routes 5:
+-32+--{210.0.0.1
+--0+
| | +--8+--{127.0.0.0
| | | +-32+--{127.0.0.1
| +--1+
| +--8+--{20.0.0.0
| +-32+--{20.1.1.1
display ip routing-table
statistics
Syntax
display ip routing-table statistics
View
All views
Parameter
None
Description
Using the display ip routing-table statistics command, you can display
the routing information for all protocols.
The information includes the number of routes per protocol, the number of active
routes per protocol, the number of routes added and deleted per protocol, and
the number of routes that are labeled deleted but that are not deleted per
protocol. The total number of routes in each of these categories is also displayed.
Example
To display the integrated route information., enter the following:
<SW7700>display ip routing-table statistics