Switch 7700 Command reference Guide, v2.0

Routing Table Display Commands 113
The information displays in the following format:
Routing tables:
Proto route active added deleted freed
DIRECT 5450 0
RIP0000 0
STATIC 0000 0
OSPF 0000 0
O_ASE 0000 0
O_NSSA 0000 0
Total 5450 0
display ip routing-table
verbose
Syntax
display ip routing-table verbose
View
All views
Parameter
None
Description
Use the display ip routing-table verbose command to display the verbose
routing table information.
The information displayed includes the route state, the verbose description of each
route and the statistics of the entire routing table.
All current routes, including inactive routes and invalid routes, are displayed.
Example
To display the verbose routing table information, enter the following:
<SW7700>display ip routing-table verbose
The information displays in the following format:
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Destinations: 3 Routes: 3
Holddown: 0 Delete: 62 Hidden: 0
**Destination: 1.1.1.0 Mask: 255.255.255.0
Protocol: #DIRECT Preference: 0
*NextHop: 1.1.1.1 Interface:
1.1.1.1(Vlan-interface1)
State: <Int ActiveU Retain Unicast>
Age: 20:17:41 Metric: 0/0
**Destination: 1.1.1.1 Mask: 255.255.255.255
Protocol: #DIRECT Preference: 0
*NextHop: 127.0.0.1 Interface: 127.0.0.1(InLoopBack0)
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42 Metric: 0/0
**Destination: 2.2.2.0 Mask: 255.255.255.0
Protocol: #DIRECT Preference: 0