Switch 7700 Command reference Guide, v2.0

OSPF Configuration Commands 141
display ospf interface Syntax
display ospf interface [ interface_type interface_number ]
View
All views
Parameter
interface_type Enter the interface type.
interface_number Enter the port number.
Description
Using the display ospf interface command, you can view OSPF interface
information for a specified port, or for all ports.
The information displayed includes OSPF configuration and running state.
Example
To display OSPF interface information, enter the following:
<SW7700>display ospf interface
The information displays in the following format:
Interface: 10.110.10.2 (Vlan-interface1)
Cost: 1 State: BackupDR Type: Broadcast
Priority: 1
Designated Router: 10.110.10.1
Backup Designated Router: 10.110.10.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
display ospf lsdb Syntax
display ospf [ area_id ] lsdb [ brief ] [ asbr | ase | network |
nssa | router | summary ] [ ip_address ] [ originate-router
ip_address ] [ self-originate ]
View
All views
Parameter
area_id Enter the ID of the OSPF area, as either an ID number or an IP address.
Description
Using the display ospf lsdb command, you can view database information
about the OSPF connecting state.
Example
To display database information about the OSPF connecting state, enter the
following:
<SW7700>display ospf lsdb