Switch 7700 Command reference Guide, v2.0

OSPF Configuration Commands 143
The information displays in the following format:
Address Type Refcount Intf Addr Intf Name
--------------------------------------------------------------------
202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2
202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2
display ospf peer Syntax
display ospf peer [ brief ]
View
All views
Parameter
None
Description
Using the display ospf peer command, you can view detailed OSPF peer
information.
Using the display ospf peer brief command, you can view brief information
of every peer in OSPF, in particular he peer number at all states in every area.
Example
To view the information on OSPF peer, enter the following:
<SW7700>display ospf peer
The information displays in the following format:
Area 0.0.0.0 interface 1.1.1.1(Vlan-interface1)'s neighbor(s)
RouterID: 1.1.1.3 Address: 1.1.1.3
State: Full Mode: Nbr is Master Priority: 1
DR: 1.1.1.3 BDR: 1.1.1.1
Dead timer expires in 31s
Neighbor is comes for 8:24
To view the brief information for every peer, enter the following:
<SW7700>display ospf peer brief
The information displays in the following format:
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading
Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
0.0.0.1 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 2 2
display ospf
request-queue
Syntax
display ospf request-queue