Switch 7700 Command reference Guide, v2.0

GMRP Configuration Commands 249
View
All views
Parameter
interface interface-list: Specifies Ethernet port list, expressed as
interface-list = { { interface_type interface_num | interface_name }
[
to { interface_type interface_num | interface_name } ]}&<1-10>. For
meanings and value ranges of
interface-type, interface-number and
interface-name, refer to the syntax description in the Port Configuration of this
manual.
Description
Use the display gmrp statistics command to display the statistics information
about GMRP.
This command is used for displaying the statistics information about GMRP,
including the list of ports with GMRP enabled, GMRP status information, GMRP
failed registrations and last origin of GMRP packet data unit (PDU).
Example
Display the statistics information about GMRP on Ethernet 1/0/1.
<SW7700>display gmrp statistics interface Ethernet 1/0/1
GMRP statistics on port Ethernet1/0/1
Gmrp Status : Enabled
Gmrp Failed Registrations: 0
Gmrp Last Pdu Origin : 0000-0000-0000
display gmrp status Syntax
display gmrp status
View
All views
Parameter
None
Description
Use the display gmrp status command to display the status of global GMRP.
This command can be used for displaying the enabled/disabled status of global
GMRP.
Example
Display the status of global GMRP.
<SW7700>display gmrp status
GMRP is enabled
Table 19 Global GMRP status information
Field Description
GMRP is enabled GMRP is enabled globally.