Switch 7700 Command reference Guide, v2.0

Logging in Commands 27
display
history-command
Syntax
display history-command
View
All views
Parameter
None
Description
Use the display history-command command to view the commands previously
entered during this login session, up to a specified maximum.
To set the maximum number of commands to display, see history-command
max-size
.
Example
To display previously entered commands, enter the following.
<SW7700>display history-command
The commands display on screen.
display user-interface Syntax
display user-interface { type number | index_number }
View
All views
Parameter
type number: Enter the type and number of the user interface you want to
display details on, for example VTY 3.
index_number: Enter the index number of the user interface you want to display
details on.
Description
Use the display user-interface command to view information on a user
interface. You can choose to access this information by user interface type and
type number, or by user interface index number. The information displayed is the
same whichever access method you use.
The displayed information includes transmission speed, priority level, and
authentication methods.
Example
To display information on a user interface with an index number of 0, enter the
following.
<SW7700>display user-interface 0