Switch 7700 Command reference Guide, v2.0

ACL Configuration Command List 273
Parameter
None
Description
Use the display acl mode command to view the ACL mode chosen by the
switch.
Example
Display the ACL mode chosen by the switch.
<SW7700>display acl mode
ACL mode: ip-based
display acl
running-packet-filter
Syntax
display acl running-packet-filter { all | interface { interface-name
| interface-type interface-num } }
View
All views
Parameter
all: Configures to display all the ACLs (including numbered and named ACLs).
interface { interface-name | interface-type interface-num }: Specifies a
port of the switch. For detailed information, refer to the port command manual.
Description
Use the display acl running-packet-filter all command to view the
information about the running state of the ACL. The displayed information
includes ACL name, rule name and running state.
Example
Display the ACL running state on all the interfaces.
<SW7700>display acl running-packet-filter all
acl std1 rule 0 running
acl std1 rule 1 running
The display information shows all the activated ACLs of the switch.
display time-range Syntax
display time-range { all | name }
View
All views
Parameter
name: Specifies the name of the time range.