Switch 7700 Command reference Guide, v2.0

Logging in Commands 29
The categories of information displayed are as follows:
flow-control Syntax
flow-control { hardware | none | software }
undo flow-control
View
User interface view
Parameter
hardware: Enter to set hardware flow control.
none: Enter to set no flow control.
software: Enter to set software flow control.
Description
■ Use the flow-control command to configure the flow control mode on the
AUX (Console) port to hardware, software or none.
■ Use the undo flow-control command to restore the default flow control
mode (no flow control).
This command can only be performed in the AUX user interface view.
Example
To configure software flow control on the AUX (Console) port, enter the following:
[SW7700-ui-aux0]flow-control software
free user-interface Syntax
free user-interface { type number | index_number }
View
User view
Parameter
type number: Enter the type and type number of the user interface to be reset.
Table 2 Output description of the display users command
Field Description
I Indicates that the user interface in use.
UI The first number in the column is the Index number of the
interface.
The three letter identifier and the number that follows are
the type and type number of the user interface.
Delay Indicates the interval from the latest input until now, in
minutes.
IPaddress Displays the host IP address of the incoming connection.
Username Display the login name of the user who is using this interface