Switch 7700 Command reference Guide, v2.0

Logon user’s ACL Control Command 295
undo traffic-statistic { inbound | outbound } { ip-group { acl-number
| acl-name } [ rule rule ] | link-group { acl-number | acl-name } [
rule rule ] }
View
Ethernet port view
Parameter
inbound: specify the traffic received by the Ethernet port.
outbound: specify the traffic sent by the Ethernet port.
ip-group { acl-number | acl-name } [ rule rule ]: Specifies a basic or
advanced ACL.
acl-number specifies the ACL sequence number, ranging from 1
to 199.
acl-name specifies the ACL name with a character string starting with
English letters ([a-z, A-Z]) and excluding space and quotation mark.
rule rule
specifies a rule of an ACL, ranging from 0 to 127. If you do not set this parameter,
all the rules will be considered.
link-group { acl-number | acl-name } [ rule rule ]: Specifies a Layer-2
ACL.
acl-number specifies the ACL sequence number, ranging from 200 to 299,
acl-name specifies the ACL name with a character string starting with English
letters ([a-z, A-Z]) and excluding space and quotation mark.
rule rule specifies a
rule of an ACL, ranging from 0 to 127. If you do not set this parameter, all the
rules will be considered.
Description
■ Use the traffic-statistic command to activate the ACL to recognize and
count the traffic(whose action is
permit).
■ Use the undo traffic-statistic command to cancel the traffic statistics.
The statistics information of traffic-statistic command includes the matched
times of the transmitted data by switch. User can use
display
traffic-statistic
command to display the statistics information.
Related command: display traffic-statistic.
Example
Count the packets matching the ACL1 rules with action permit.
[SW7700-Ethernet3/0/1]traffic-statistic inbound ip-group 1
Logon user’s ACL
Control Command
This section describes how to use the Logon user’s ACL control commands on your
Switch 7700.
acl Syntax
acl acl-number { inbound | outbound }
View
User-interface view