Switch 7700 Command reference Guide, v2.0

34 CHAPTER 1: USING SYSTEM ACCESS COMMANDS
undo modem timer answer
View
User interface view
Parameter
seconds: Specifies the time between lifting the receiver and detecting the carrier,
in the range 1 second to 60 seconds. The default value is 30.
Description
■ Use the modem timer answer seconds command to configure the timer
answer period, in seconds, from off-hook to carrier detected when establishing
a call-in connection.
■ Use the undo modem timer answer command to restore the default timeout
value (30 seconds).
Example
To set the timer answer of AUX 0 to 45 seconds, enter the following:
[SW7700-ui-aux0]modem timer answer 45
parity Syntax
parity { even | mark | none | odd | space }
undo parity
View
User interface view
Parameter
even: Sets the Switch to even parity.
mark: Sets the Switch to mark parity (1)
none: Sets the Switch to perform no parity checking.
odd: Sets the Switch to odd parity.
space: Sets the Switch to zero parity (0)
Description
■ Use the parity command to configure the parity mode on the AUX (Console)
port.
■ Use the undo parity command to restore the default parity mode (no parity
checking).
This command can only be performed in the AUX user interface view.
Example
To set mark parity on the AUX (Console) port, enter the following:
[SW7700-ui-aux0]parity mark