Switch 7700 Command reference Guide, v2.0

366 CHAPTER 9: USING AAA AND RADIUS COMMANDS
View
System view
Parameter
isp-name: Specifies an ISP domain name. The name is expressed with a character
string not exceeding 24 characters, excluding “/”, “: ”, “*”, “? ”, “<”, and “>”.
default: configure default ISP.
disable: Disable default ISP configuration.
enable: Enable default ISP configuration.
Description
■ Use the domain command to configure an ISP domain or enter the view of an
existing ISP domain.
■ Use the undo domain command to cancel a specified ISP domain.
By default, there is no ISP domain in the system.
ISP domain is a group of users belonging to the same ISP. Generally, for a
username in the userid@isp-name format, taking
[e-mail] as an
example, the isp-name (i.e.
3Com163.net) following the @ is the ISP domain name.
When 3Com SW7700 Series Ethernet Switches control user access, as for an ISP
user whose username is in userid@isp-name format, the system will take userid
part as username for identification and take isp-name part as domain name.
The purpose of introducing ISP domain settings is to support the application
environment with several ISP domains. In this case, an access device may have
supplicants from different ISP domains. Because the attributes of ISP users, such as
username and password structures, service types, may be different, it is necessary
to separate them by setting ISP domains. In ISP domain view, you can configure a
complete set of exclusive ISP domain attributes for each ISP domain, which
includes AAA schemes ( RADIUS server group applied and so forth.)
For a switch, each supplicant belongs to an ISP domain. The system supports to
configure up to 16 ISP domains. If a user has not reported its ISP domain name,
the system will put it into the default domain.
When this command is used, if the specified ISP domain does not exist, the system
will create a new ISP domain. All the ISP domains are in the
active state when
they are created.
Related commands: access-limit, radius scheme, state, display domain.
Example
Create a new ISP domain, marlboro.net, and enters its view.
[SW7700]domain marlboro.net
New Domain added.
[SW7700-isp-3Com163.net]