Switch 7700 Command reference Guide, v2.0

RADIUS Protocol Configuration Commands 373
Parameter
None
Description
Use the display local-server statistics command to view the configuration
information of local RADIUS server group.
Related command: local-server.
Example
Display local RADIUS server group information.
<SW7700> display local-server statistics
The localserver packet statistics:
Receive: 0 Send: 0
Discard: 0 Receive Packet Error: 0
Auth Reveive: 0 Auth Send: 0
Acct Receive: 0 Acct Send: 0
display radius Syntax
display radius [ radius-server-name ]
View
All views
Parameter
radius-server-name: Specifies the RADIUS server group name with a character
string not exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”.
Display all RADIUS server groups when the parameter is not set.
Description
Use the display radius command to view the configuration information of all
RADIUS server groups or a specified one.
By default, this command outputs the configuration information about the
specified or all the RADIUS server groups. The output can help with RADIUS
diagnosis and troubleshooting.
Related command: radius scheme.
Example
Display the configuration information of all the RADIUS server groups.
<SW7700>display radius
------------------------------------------------------------------
ServerName =default Index=0 Type=standard
Primary Auth IP =0.0.0.0 Port=1812 State=Down
Primary Acct IP =0.0.0.0 Port=1813 State=Down
Second Auth IP =0.0.0.0 Port=1812 State=Down
Second Acct IP =0.0.0.0 Port=1813 State=Down
Auth Server Encryption Key= 3Com
Acct Server Encryption Key= 3Com
TimeOutValue (seconds)=3 RetryTimes=3 RealtimeACCT (minutes)=12
Permitted send realtime PKT failed counts =5