Switch 7700 Command reference Guide, v2.0

374 CHAPTER 9: USING AAA AND RADIUS COMMANDS
Retry sending times of noresponse acct-stop-PKT =500
Username format =with-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
ServerName =3Com Index=1 Type=standard
Primary Auth IP =10.11.1.1 Port=1812 State=Up
Primary Acct IP =10.11.1.2 Port=1813 State=Up
Second Auth IP =10.11.1.2 Port=1812 State=Up
Second Acct IP =10.11.1.1 Port=1813 State=Up
Auth Server Encryption Key= 3Com
Acct Server Encryption Key= 3Com
TimeOutValue (seconds)=3 RetryTimes=3 RealtimeACCT (minutes)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Username format =without-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
Printed [2] items
display radius statistics Syntax
display radius statistics
View
All views
Parameter
None
Description
Use the display radius statistics command to view the statistics information
of RADIUS packet.
This command outputs the statistics information about the RADIUS packets. The
displayed packet information can help with RADIUS diagnosis and
troubleshooting.
Related command: radius scheme.
Example
Display the statistics information of RADIUS packets.
<SW7700>display radius statistics
state statistic(total=1528):
DEAD=1528 AuthProc=0 AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=0
AcctStop=0 OnLine=0 Stop=0
StateErr=0
Receive and Send packets statistic:
Send PKT total :0 Receive PKT total:0
RADIUS received packets statistic: