Switch 7700 Command reference Guide, v2.0

384 CHAPTER 9: USING AAA AND RADIUS COMMANDS
undo secondary accounting
View
RADIUS server group view
Parameter
ip-address: IP address, in dotted decimal format. By default, the IP addresses of
second accounting server is at 0.0.0.0.
port-number: Specifies the UDP port number, ranging from 1 to 65535. By
default, the accounting service is provided via UDP 1813.
Description
■ Use the secondary accounting command to configure the IP address and port
number for the second RADIUS accounting server.
■ Use the undo secondary accounting command to restore the IP address and
port number to default values.
For detailed information, read the Description of the primary accounting
command.
Related commands: key, radius scheme, state.
Example
Set the IP address of the second accounting server of RADIUS server group, 3Com,
to 10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service.
[SW7700-radius-3Com]secondary accounting 10.110.1.1 1813
secondary
authentication
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS server group view
Parameter
ip-address: IP address, in dotted decimal format. By default, the IP addresses of
second authentication/authorization is at 0.0.0.0.
port-number: Specifies the UDP port number, ranging from 1 to 65535. By
default, the authentication/authorization service is provided via UDP 1812
Description
■ Use the secondary authentication command to configure the IP address
and port number for the second RADIUS authentication/authorization.
■ Use the undo secondary authentication command to restore the IP address
and port number to default values.
For detailed information, read the Description of the primary authentication
command.