Switch 7700 Command reference Guide, v2.0

438 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
Parameter
shelf-no: Cabinet number.
frame-no: Chassis number.
slot-no: Slot number.
Description
Using the display device command, you can display the module type and
working status information of a card, including physical card number, physical
daughter card number, number of ports, hardware version number, FPGA version
number, version number of BOOTROM software, application version number,
address learning mode, interface card type and interface card type description,
etc.
Example
Show device information.
<SW7700>display device
Slot No Brd Type Brd Status Subslot Num
0 FAB64 Normal 0
1 8BT Absent Absent
2 24FS Normal 0
3 48TX Absent Absent
4 24FX Normal 0
5 8GBIC Absent Absent
6 NONE Absent Absent
display environment Syntax
display environment
View
All views
Parameter
None
Description
Using the display environment command, you can display environment
information.
Example
Display the environment information.
<SW7700>display environment
Tab le 31 Output description of the display device command
Field Description
SlotNo Physical card number
Subslot Num Sub-slot number
Brd Type Board type
Brd Status Board status