Switch 7700 Command reference Guide, v2.0

446 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
Parameter
None
Description
Using the display current-configuration command, you can display the
current effective configuration parameters of Ethernet Switch and verify the
current effective parameters.
If some effective configuration parameters are the same as the default working
parameters, there is no display.
For the related commands, see save, reset saved-configuration, display
saved-configuration
.
Example
Display current effective configuration parameters of Ethernet Switch.
<SW7700>display current-configuration
#
hostname SW7700
#
no hdp run
#
no htp run
#
radius-server host default
#
aaa authentication Default radius next local
aaa accounting Default enable offline
user user1 state active service-type ftp ftp-directory flash:
#
ip multicast-routing
#
vlan 1
#
vlan 2
#
vlan 3
#
vlan 5
#
vlan 6
#
interface Vlan-interface1
#
interface Vlan-interface2
ip address 1.1.2.1 255.255.255.0
#
interface Vlan-interface3
ip address 1.1.3.1 255.255.255.0
#
interface Vlan-interface5
ip address 10.110.65.1 255.255.255.0
vrrp ip 1 10.110.65.2