Switch 7700 Command reference Guide, v2.0

464 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
Description
Using the info-center trapbuffer command, you can output information to
the trap buffer. Using the
undo info-center trapbuffer command, you can
cancel output information to trap buffer.
By default, output information is transmitted to trap buffer and size of trap buffer
is 20.
This command takes effect only after the system logging is enabled.
Related commands: info-center enable, display info-center.
Example
Send information to the trap buffer and sets the size of buffer as 30.
[SW7700]info-center logbuffer max-size 30
rename channel Syntax
rename channel channel-number channel-name
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name with a character string not exceeding
30 characters, excluding "-", "/" or "\". .
Description
Using the rename channel command, you can rename a channel specified by the
channel-number as channel-name.
Note that the channel name cannot be duplicated.
Example
Rename the channel 0 as execconsole.
[SW7700]rename channel 0 execconsole
reset logbuffer Syntax
reset logbuffer
View
User view
Parameter
None
Description
Using the reset logbuffer command, you can clear information in log buffer.