Switch 7700 Command reference Guide, v2.0

SNMP Configuration Commands 467
undo terminal trapping commands. When the terminal monitor is enabled, you
can use
terminal debugging / undo terminal debugging, terminal logging
/ terminal logging and terminal trapping / undo terminal trapping
respectively to enable or disable the corresponding functions.
Example
Disable the terminal monitor.
<SW7700>undo terminal monitor
terminal trapping Syntax
terminal trapping
undo terminal trapping
View
User view
Parameter
None
Description
Using the terminal trapping command, you can enable terminal trap
information display. Using the
undo terminal trapping command, you can
disable this function.
By default, this function is enabled.
Example
Enable trap information display.
<SW7700>terminal trapping
SNMP Configuration
Commands
This section displays the Simple Network Management Protocol (SNMP)
commands available on your Switch 7700.
display snmp-agent
community
Syntax
display snmp-agent community [ read | write ]
View
All views
Parameter
read: display read-only community information.
write: display read-write community information.
Description
Using the display snmp-agent community command, you can display the
currently configured community names.