Switch 7700 Command reference Guide, v2.0

RMON Configuration Commands 483
View
All views
Parameter
alarm-table-entry: Alarm table entry index.
Description
Using the display rmon alarm command, you can display RMON alarm
information.
For the related commands, see rmon alarm.
Example
Display the RMON alarm information.
<SW7700>display rmon alarm
Alarm table 1 is UNDERCREATION, and owned by Configer,
every 1 second(s) monitoring Ethernet1/0/1 ebcastpkts.
Rising threshold is 1, linked with event 5.
Falling threshold is 2, linked with event 5.
On startup enables risingOrFallingAlarm.
It's latest absolute sampled values was 0.
display rmon event Syntax
display rmon event [ event-table-entry ]
View
All views
Parameter
event-table-entry: Entry index of event table.
Description
Using the display rmon event command, you can display RMON events.
The display includes event index in event table, owner of the event, description to
the event, action caused by event (log or alarm information), and occurrence time
of the latest event (counted on system initiate/boot time in centiseconds).
Table 39 Output description of the display rmon alarm command
Field Description
Alarm table 1 Index 1 in the alarm table
UNDERCREATION The entry corresponding to the index is under creation.
Configer Owner
Rising threshold is 1 The rising threshold is 1
Falling threshold is 2 The falling threshold is 2
startup The first trigger
risingOrFallingAlarm The type of the first alarm: Specifies to alarm when
exceeding the rising threshold or the falling threshold
absolute sampled values Absolute sampled values