Switch 7700 Command reference Guide, v2.0

486 CHAPTER 11: USING SYSTEM MANAGEMENT COMMANDS
display rmon prialarm Syntax
display rmon prialarm [ prialarm-table-entry ]
View
All views
Parameter
prialarm-table-entry: entry of extended alarm table.
Description
Using the display rmon prialarm command, you can display information about
extended alarm table.
Related command: rmon prialarm.
Example
Display alarm information about extended RMON.
<SW7700>display rmon prialarm
display rmon statistics Syntax
display rmon statistics [ port-num ]
View
All views
Parameter
port-num: Ethernet port number.
Description
Using the display rmon statistics command, you can display RMON statistics.
The displayed information includes collision, CRC (Cyclic Redundancy Check) and
queue, undersized or oversized packet, timeout, fragment, broadcast, multicast,
unicast, and bandwidth utility.
Related command: rmon statistics.
packets Packets sent/transmitted in sampling time
broadcastpackets Number of broadcast packets
multicastpackets Number of multicast packets
CRC alignment errors Number of CRC error packets
undersized Number of undersized packets
oversized packets Number of oversized packets
fragments Number of undersized and CRC error packets
jabbers Number of oversized and CRC error packets
collisions Number of collision packets
utilization Utilization
Table 42 Output description of the display rmon history command