Switch 7700 Command reference Guide, v2.0

RMON Configuration Commands 489
trap-community: Name of the community that trap message is sent to.
log-trap: Log and trap event.
log-trapcommunity: Name of the community that trap message is sent to.
none: neither log nor trap event.
owner rmon-station: Name of the network management station that creates
this entry. The length of the character string ranges from 1 to 127.
Description
Using the rmon event command, you can add an entry to the event table. Using
the
undo rmon event command, you can delete an entry from this table.
Event management of RMON defines the way to deal with event number and
event-log, send trap message or log while sending trap message. In this way,
alarm events may obtain corresponding treatment
Example
Add the entry 10 to the event table and marks it as log event.
[SW7700]rmon event 10 log
rmon history Syntax
rmon history entry-number buckets number interval sampling-interval
[ owner text-string ]
undo rmon history entry-number
View
Ethernet port view
Parameter
entry-number: Number of the entry to be added/deleted, ranging from 1 to
65535.
buckets number: Capacity of the history table corresponding to the control line.
interval sampling-interval: Sampling interval, ranging from 5 to 3600
(measured in seconds).
owner text-string: Creator of the line. Length of the character string ranges from
1 to127.
Description
Using the rmon history command, you can add an entry to the history control
table. Using the
undo rmon history command, you can delete an entry from
history control table.
Perform this command to sample, set sample parameter (sample time interval) and
storage amounts for a port. RMON will periodically perform data collection and