Switch 7700 Command reference Guide, v2.0

Ethernet Port Configuration Commands 49
The information displays in the following format:
mirroring-group 1 inbound Ethernet3/0/47 mirrored-to Ethernet3/0/48
This indicates that mirror-group 1 is only capturing incoming packets from the port
Ethernet3/0/47 and mirroring these packet to the egress port Ethernet3/0/48
display port Syntax
display port { hybrid | trunk }
View
All Views
Parameter
hybrid: Enter to display the hybrid ports.
trunk: Enter to display the trunked ports.
Description
■ Use the display port hybrid command to view the ports whose link type is
hybrid.
■ Use the display port trunk command to view the ports whose link type is
trunk.
If there is a port of the specified type, the corresponding port details display.
Example
To display the currently configured hybrid ports, enter the following:
<SW7700>display port hybrid
The details display in the following format:
The following hybrid ports exist:
Ethernet1/0/1 Ethernet1/0/2
This example indicates that the current configuration has two hybrid ports,
Ethernet1/0/1 and Ethernet1/0/2.
duplex Syntax
duplex { auto | full | half }
undo duplex
View
Ethernet port view
Parameters
auto: Enter to set the port to auto-negotiation.
full: Enter to set the port to full-duplex.
half: Enter to set the port to half-duplex.