Switch 7700 Command reference Guide, v2.0

NTP Configuration Commands 491
Description
Using the rmon prialarm command, you can add an entry to the extended RMON
alarm table. Using the
undo rmon prialarm command, you can delete an entry
from the extended RMON alarm table.
The number of instances can be created in the table depends on the hardware
resource of the product.
Example
Delete line 10 from the extended RMON alarm table.
[SW7700]undo rmon prialarm 10
rmon statistics Syntax
rmon statistics entry-number [ owner text-string ]
undo rmon statistics entry-number
View
Ethernet port view
Parameter
entry-number: Number of the entry to be added/deleted, ranging from 1 to
65535.
owner text-string: Creator of the entry. Length of the character string ranges
from 1 to127.
Description
Using the rmon statistics command, you can add an entry to the statistic table.
Using the
undo rmon statistics command, you can delete an entry from
statistic table.
RMON statistic management concerns the statistics and monitoring of the usage
and error on a port. Statistics includes collision, CRC (Cyclic Redundancy Check)
and queue, undersized or oversized packet, timeout, fragment, broadcast,
multicast, unicast, and bandwidth utility.
Example
Add the entry 20 to the statistics table of Ethernet1/0/1.
[SW7700-ethernet1/0/1]rmon statistics 20
NTP Configuration
Commands
This section describes the Network Time Protocol (NTP) configuration commands
available on your Switch 7700.
debugging ntp-service Syntax
debugging ntp-service { access | adjustment | authentication | event
| filter | packet | parameter | refclock | selection |
synchronization | validity | all }