AdvanceStack Switch 2000 10Base-FL Module Installation Guide 1996-09

10
Installing the 10Base-FL Module in an Unused Slot
Figure 6. Securing the Module in the Slot
7. Connect the appropriate ST-type network cables to the module’s
10Base-FL ports.
Figure 7. Connecting a Cable
Tighten These Two Screws
To Rx Jack in 10Base-FL
Port on Another Device
To Tx Jack in 10Base-FL
Port on Another Device
blue_2b.fm5 Page 10 Monday, September 23, 1996 8:03 AM