Installation Guide HP J2443A 8-Mbyte Memory Upgrade for the HP Router 650 1994-08

16. Pull the locks on the bezel outward, then push evenly on
both ends of the bezel until it engages fully and the locks
swing inward to about 45°.
17. Push the two locks evenly to close them, pressing downward
slightly to secure them in place.
Verify router initialization.
1. Connect a console to the router—refer to the procedure
described under “Connect a console” in chapter 1 of the
router’s Installation Guide.
2. Switch on the router power and verify that no errors are
found during the power-on self-test—refer to the procedure
described under “Plug in and verify router hardware” in
chapter 1 of the router’s Installation Guide.
Figure 5. Reinstalling Routing Engine
Verify router initialization.
8