HP StorageWorks 1/8 G2 Tape Autoloader and MSL2024, MSL4048 and MSL8096 Tape Libraries Ultrium 920 parallel SCSI tape drive firmware release notes (AK378-96034, September 2010)

HP StorageWorks 1/8 G2 Tape

Autoloader, and MSL2024, MSL4048,

and MSL8096 Tape Libraries

Ultrium 920 parallel SCSI tape drive

firmware release notes

Version D24W

Part Number: AK378-96034

First edition: April 26, 2010

PAGE 1
HP StorageWorks 1/8 G2 Tape Autoloader, and MSL2024, MSL4048, and MSL8096 Tape Libraries Ultrium 920 parallel SCSI tape drive firmware release notes nl Version D24W Part Number: AK378-96034 First edition: April 26, 2010
PAGE 2
PAGE 3
Description This release includes updated tape drive firmware for Ultrium 920 half-height parallel SCSI HP StorageWorks 1/8 G2 Tape Autoloaders, and MSL2024, MSL4048, MSL 8048, and MSL8096 Tape Libraries. The tape drive firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP). • HP Library and Tape Tools (L&TT).
PAGE 4
1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.com/support/storage. Copy the firmware onto the USB flash drive. 2. Insert the USB flash drive into the USB port on the back of the Library. 3. From the Home screen, press Next until the screen displays Support. Press Enter to select. 4. Press Next until the screen displays Drive FW upgrade. Press Enter to select. 5. Enter the administrator password if prompted. 6.