Manualshelf

Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP B-series 24-40-port SAN Switch Adaptive Networking RTU
551552553554555556557558559560
2-522 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
portStats64Show
2
Note: Enter commands in lowercase only; mixed case is for readability.
Rx peak Byte rate (Bytes/sec).
stat64_PRJTFrames Number of P_RJT frames transmitted.
stat64_PBSYFrames Number of P_BSY transmitted.
stat64_inputBuffersFull
Occasions on which input buffers are full.
stat64_rxClass1Frames
Class 1 frames received.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
portnumber Specify a port number to be displayed, relative to its slot for bladed systems. Use
switchShow to display a list of valid ports.