Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)
Brocade Network Advisor SAN User Manual 13
53-1002167-01
User interface components
1
• Domain ID. Displays the Domain ID for the product in the format xx(yy), where xx is the
normalized value and yy is the actual value on the wire.
• FC Address. Displays the Fibre Channel address of the port.
• Firmware. Displays the firmware version of the product.
• IP Address. Displays the IP address (IPv4 or IPv6 format) of the product.
• Location. Displays the physical location of the product. This field is editable at the fabric level.
• Model. Displays the model number of the product.
• Name. Displays the name of the product or port. This field is editable at the fabric, device, and
port level.
• Port #. Displays the number of the port.
• Port Count. Displays the number of ports on the product.
• Port Type. Displays the type of port (for example, expansion port, node port, or NL_port).
• Protocol. Displays the protocol for the port.
• Serial #. Displays the serial number of the product.
• Speed Configured (Gbps). Displays the actual speed of the port in Gigabits per second.
• State. Displays the state for the product and the port.
• Status. Displays the status for the product and the port.
• Symbolic Name. Displays the symbolic name for the port.
• TAG. Displays the tag number of the product.
• Vendor. Displays the name of the product’s vendor.
• WWN. Displays the world wide name of the product or port.
• Zone Alias. Displays the zone alias of the product or port.
Connectivity Map
The Connectivity Map, which displays in the upper right area of the main widow, is a grouped map
that shows physical and logical connectivity of SAN components, including discovered and
monitored devices and connections. These components display as icons in the Connectivity Map.
For a list of icons that display in the Connectivity Map, refer to the following tables:
• “SAN product icons” on page 17
• “SAN group icons” on page 19
• “Event icons” on page 21