Manualshelf

Brocade Network Advisor Migration Guide - Supporting Network Advisor 11.1.X (53-1002321-01, May 2011)

ManualsBrandsHP ManualsComputer AccessoriesHP B-series Data Center Fabric Manager Professional Plus LTU
71727374757677787980
Brocade Network Advisor Migration Guide 73 of 82
53-1002321-01
Cross flavor migration
7. Complete the following steps on the SMI Agent Configuration screen.
a. Enable the SSL by selecting the Enable SSL check box, if necessary.
b. Enter the SMI Agent port number in the SMI Agent Port # field (default is 5989 if SSL Enabled is selected;
otherwise, the default is 5988).
c. Click Next.
8. Select one of the following options on the SAN Network Size screen (for Pure Fabric OS fabrics only) and click
Next:
NOTE
Port count is equal to the total number of switch ports across all fabrics.
• Small (managing up to 2000 switch ports, 1-20 domains)
• Medium (managing up to 5000 switch ports, 21-60 domains)
• Large (managing up to 9000 switch ports, 61-120 domains)
9. Verify your configuration information on the Server Configuration Summary screen and click Next.
10. Complete the following steps on the Start Server screen.
a. Select the Start SMI Agent check box, if necessary.
b. Select the Start SLP check box, if necessary.
c. Click Finish.
After all of the services (SLP and SMI Agent) are started, the configuration wizards closes. You can launch
Network Advisor Server Management Console (Start > Programs > Network Advisor 11.1.X > Server
Management Console) to make changes to the SMI Agent configuration.
Cross flavor migration
NOTE
Cross flavor migration is only supported within the same release and software version.
To migrate from Brocade Network Advisor 11.0.X to a Non-Brocade Network Advisor 11.1.X, complete the following
steps.
1. Install Brocade Network Advisor 11.1.X (refer to “Installing the application” on page 24).
2. Migrate from Brocade Network Advisor 11.0.X to Brocade Network Advisor 11.1.X (refer to “Network Advisor
migration” on page 43).
3. Perform a partial uninstallation of Brocade Network Advisor 11.1.X (refer to “Uninstallation” on page 81).
4. Install Non-Brocade Network Advisor 11.1.X (refer to “Installing the application” on page 24).
5. Migrate the partially uninstalled data (refer to “Network Advisor migration” on page 43) to the Non-Brocade
Network Advisor 11.1.X by browsing to the Brocade Network Advisor 11.1.X location on the Copy Data and
Setting screen.