Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

276 DCFM Professional User Manual
53-1001355-01
Editing a CEE port
11
3. Click Edit.
The Edit Switch dialog box displays (Figure 87).
FIGURE 87 Edit Switch dialog box
4. Configure the policies for the Edit Switch tabs, which are described in the following sections:
• “QoS configuration” on page 282
• “LLDP-DCBX configuration” on page 291
• “Access Control List configuration” on page 296
• “Spanning Tree Protocol configuration” on page 302
• “802.1x authentication” on page 307
5. When you have finished configuring the policies, apply the settings to the switch.
6. Click OK.
The CEE Confirmation and Status dialog box displays.
7. Review the changes carefully before you accept them.
8. Click Start to apply the changes, or click Close to abort the operation.
Editing a CEE port
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a CEE port from the Products/Ports table.