Data Center Fabric Manager Professional User Manual v10.3.X (53-1001355-01, November 2009)

324 DCFM Professional User Manual
53-1001355-01
Viewing and editing group properties
12
Viewing and editing group properties
To view encryption group properties, complete the following steps.
1. Select Configure > Encryption.
The Encryption Center dialog box displays.
2. If groups are not visible in the Encryption Devices table, select View > Groups from the menu
bar.
The encryption groups display in the Encryption Devices table.
3. Select a group from the Encryption Devices table, and select Group > Properties from the
menu bar, or right-click the group and select Properties.
The Encryption Group Properties dialog box, shown in Figure 106, has six tabs which are
defined in this section:
• “General tab” on page 325
• “Members tab” on page 325
• “Security tab” on page 328
• “HA Clusters tab” on page 329
• “Engine Operations tab” on page 329
• “Link Keys tab” on page 330
• “Tape Pools tab” on page 331
NOTE
The Link Keys tab appears only if the key vault type is NetApp LKM.
FIGURE 107 Encryption Group Properties dialog box