HP Intelligent Infrastructure Analyzer Software User Guide
SAN Event Log
Events are generated based on the following scenarios:
• Component added or removed.
• Monitored switch is not reachable.
• Credentials are invalid.
• Protocol time out errors.
• License applied, modified or expired.
• Days pending for License expiry.
The event log is shown in a tabular format. The rows in the table display the events, with one event
per row in descending order. The columns in the table display the following event attributes:
• ID – event ID (for example: E1).
• Severity – severity level of the event.
• Component
• Time – time when the event was generated (all the events generated from a single DC cycle
will have the same time).
• Description – event description.
Figure 9 SAN Event Logs
SAN Event Logs view lists the following:
• In the Rows per page drop-down list, select the number of rows of event that must be displayed
on each page.
• Click Select All to select all the check boxes in the current page, click Unselect All to unselect
all the check boxes.
Event Manager 21