Advanced Data Guarding User Guide

System Setup 3-9
Compaq Confidential – Need to Know Required
Writer: John Turner Project: Advanced Data Guarding for the Smart Array 5300 Controller Reference Guide Comments: final draft
Part Number: 188270-xx1 File Name: d-ch3 System Setup.doc Last Saved On: 12/11/00 12:02 PM
To change the stripe size, carry out the procedure described for your operating
system in one of the following sections.
Windows NT and Windows 2000
1. Check that you have the latest version of the configuration utility by
visiting the Compaq website (www.compaq.com). Download and install
the newer version if necessary. An ACU program icon will
automatically be generated on the desktop.
2. Double-click the ACU icon.
3. Select the logical drive to be reconfigured from the left-hand side of the
main ACU screen.
4. Click the Migrate button in the Logical Drive section on the right-hand
side of the main ACU screen.
5. Change the stripe size.
6. Click the Done button.
7. Click Save Configuration on the Controller menu.
8. Click Exit on the Controller menu.
NetWare
1. Check that you have the latest support pack or operating system patch
from the Novell website installed on your system.
2. Check that you have the latest drivers for the Smart Array 5300 from the
Compaq website installed on your system.
3. Open the CPQONLIN utility.
4. On the Main Configuration View screen, highlight the logical drive that
is to be reconfigured.
5. Click the Drive Settings option on the Logical Drive menu.
6. Choose a stripe size.
7. Save the changes and close out of CPQONLIN.