Installation Guide, Third Edition - Server Expansion Unit

Chapter 2
Installation
Unpacking the Server Expansion Unit
21
Step 6. Remove the six bolts from the base attaching the rack to the pallet. See Figure 2-3.
Figure 2-3 Preparing to Roll Off the Pallet
WARNING Be sure that the leveling feet on the rack are raised before you roll the rack
down the ramp and any time you roll the rack on the casters. Use caution
when rolling the cabinet off the ramp. A single server in the cabinet weighs
several hundred pounds. HP strongly recommends that two people roll the
cabinet off the pallet.