Installation Guide, Third Edition - Server Expansion Unit

Chapter 3

Installing Accessories

Installing Additional Components

PCI I/O Card Installation

NOTE The PCI I/O card installation process varies depending on which version of the HP-UX

operating system you are running on your system. PCI I/O card installation procedures should

be downloaded from the http://docs.hp.com/ Web site. Background information and procedures

for adding a new PCI I/O card using online addition are found in:

• HP System Partitions Guide for HP-UX 11.11

• Interface Card OL* Support Guide for HP-UX 11.23

Step 1. Consult the appropriate guide for instructions on preparing the operating system for the online

addition of the PCI I/O card before attempting to insert a PCI I/O card into the PCI-X assembly

backplane slot.

Step 2. Remove the top cover.

J3525A 2-port serial (X25/FR/SDLC) 16 16

J3526A 4-port serial (X25/FR) 16 N

Z7340A 8 port PCI ACC 16 16

A9782A PCI-X 1000Base-SX GigE / 2G FC Combo 16B N

a. Supports a pre-OS network boot (IODC or EFI) for the purpose of OS installation (ignite, RIS).

b. This I/O card will be supported at the first update of the HP-UX B.11.23 release.

Table 3-1 Server Expansion Unit I/O Cards (Continued)

Product

Number

Card Description

Number of cards

supported when

connected to HP 9000

rp8400/rp8420 server

(B - Bootable)

Number of cards

supported when

connected to HP

Integrity rx8620

server

(B - Bootable,

N - Not supported)