Installation Guide, Third Edition - Server Expansion Unit

Chapter 4
Cabling and Power Up
Applying 48V Power to the Server Expansion Unit and to the HP 9000 rp8400 server
91
Step 4. Verify the new core I/O card FPGAs (2.008) and MP (4.013) revisions using the sysrev command.
MP:CM> sysrev
Cabinet FPGA and Firmware revision report
System Backplane : GPM FM OSP
--- --- ---
1.002 1.002 1.002
PCI Backplane : LPM HS
--- ---
1.002 1.000
LPM BOB Drain SINC PDC
--- --- ----- ---- ---
CELL 0 : 2.002 1.000 1.001 2.002 17.005
CELL 1 : 2.002 1.000 1.001 2.002 17.005
CELL 2 : 2.002 1.000 1.001 2.002 17.005
CELL 3 : 2.002 1.000 1.001 2.002 17.005
FPGA MP
---- ---
Master Core IO : 2.008 4.013
Slave Core IO : 2.008 4.013
Step 5. Boot the HP 9000 rp8400 server to the HP-UX operating system login prompt.
Step 6. Log in and execute the ioscan (using the desired options) command to verify the new Server
Expansion Unit I/O paths are available for use.